JBL AV1 - Manual (Page 28)

Basic Operation
JBL Performance
2-10
COMMAND MATRIX
The command matrix describes the commands remote control buttons perform when
each command bank is active.
Button Main Zone Shift 1 Shift 2
1 Deactivates standby mode and
activates the AV1. Reserved for possible
future expansion. Reserved for possible
future expansion.
2 Activates standby mode and
deactivates the AV1. Reserved for possible
future expansion. Reserved for possible
future expansion.
3 Toggles the FRONT PANEL
DISPLAY menu STATUS param-
eter between ALWAYS OFF and
its current setting. Centers the AUDIO CON-
TROLS menu BALANCE
and FADER parameters. Reserved for possible
future expansion.
4 Toggles the ON-SCREEN DIS-
PLAY menu BACKGROUND
parameter between ON and
OFF. Deactivates the trigger out-
put connector (1) when
the connector is config-
ured for remote operation. Sets the AUDIO CON-
TROLS menu BASS,
TREBLE, and TILT EQ
parameters to +0.0dB.
5 Toggles the ON-SCREEN DIS-
PLAY menu STATUS parameter
between ALWAYS OFF and its
current setting. Activates the trigger output
connector labeled 1 when
the connector configured
for remote operation. Reserved for possible
future expansion.
6 Displays the two-line status for
2 seconds. Toggles between opening
and closing the STATUS
menu for the current input
source. Reserved for possible
future expansion.
7 Activates an additional bank of commands that control the AV1. See “Command Bank
Activation” on page 3-9 for more information.
8 Activates an additional bank of commands that control the AV1. See “Command Bank
Activation” on page 3-9 for more information.
2
4
7
3
1
6
8
5