Installing clothing guards, Note: for this procedure, refer to figure 6.5, Repeat steps 1-4 for the opposite rigid side guard – Invacare XtraTM 1026793 User Manual

Page 41: Half clamp, Figure 6.5 installing clothing guards

SECTION 6—SEAT

Part No 1026793

Xtra™

Installing Clothing Guards

NOTE: For this procedure, refer to FIGURE 6.5.

1. Position the threaded and unthreaded half clamps on inside and outside of the

wheelchair frame.

NOTE: Make sure the threaded half clamp is on
the outside of the wheelchair frame.

2. Loosely install the washer and socket

screw into the unthreaded and
threaded half clamps.

3. Determine the desired rigid clothing

guard position and securely tighten the
two (2) half clamps together with the
socket screw.

4. Insert the rigid clothing guard into the

slot on the threaded half clamp.

5. Repeat STEPS 1-4 for the opposite rigid

side guard.

FIGURE 6.5 Installing Clothing Guards

Half Clamp

Wheelchair

Frame

Socket Screw

Washer

Threaded Half Clamp

Slot

Rigid Clothing

Guard