Reaching, leaning and bending - forward, M warning, Note: for this procedure, refer to figure 2.6 – Invacare XtraTM 1026793 User Manual
Page 22: Figure 2.6 reaching, leaning and bending - forward, Reaching, bending - backward, Note: for this procedure, refer to figure 2.7, Figure 2.7 reaching, bending - backward, Reaching, leaning and, Bending - forward
SECTION 2—SAFETY/HANDLING OF WHEELCHAIRS
22
Part No 1026793
Reaching, Leaning and
Bending - Forward
ƽ WARNING
DO NOT attempt to reach objects if you have to move forward in the seat or pick
them up from the floor by reaching down between your knees.
NOTE: For this procedure, refer to FIGURE 2.6.
Position the casters so that they are extended away from the drive wheels and engage
wheel locks.
FIGURE 2.6 Reaching, Leaning and Bending - Forward
Reaching, Bending - Backward
ƽ WARNING
DO NOT lean over the top of the back upholstery. This will change your center of
gravity and may cause you to tip over.
Keep hands and fingers clear of moving parts to avoid injury.
NOTE: For this procedure, refer to FIGURE 2.7.
Position wheelchair as close as possible to the desired object. Position the casters so that
they are extended away from the drive wheels to create the longest possible wheelbase.
Reach back only as far as your arm will extend without changing your sitting position.
FIGURE 2.7 Reaching, Bending - Backward