Invacare ESS-PTO - Manual (Page 46)

Metal Curved Back Assembly
NOTE: Curved Back mounts only to back canes without a 10 degree bend.
NOTE: As of 8/15/08 the Curved Back material changed from ABS Plastic to Metal as inventory runs out.
You must ask the customer if they have an ABS Plastic or the Metal Curved Back model when replacing
components. All service replacement Back Assemblies with Hardware shipped will be metal. New
Headrest Mounting Hardware is required when replacing an ABS Curved Back with a Metal Curved Back.
#1 Back Pan w/ Vinyl Edge Trim - 19"-22" Wide
Overall
Back Height
Material
Back Height
19" Wide 20" Wide 21" Wide 22" Wide
1157892 1157881 1157870 1157859 11" 16"
1157893 1157882 1157871 1157860 12" 17"
1157894 1157883 1157872 1157861 13" 18"
1157895 1157884 1157873 1157862 14" 19"
1157896 1157885 1157874 1157863 15" 20"
1157897 1157886 1157875 1157864 16" 21"
1157898 1157887 1157876 1157865 17" 22"
1157899 1157888 1157877 1157866 18" 23"
1157900 1157889 1157878 1157867 19" 24"
NOTE: Hook Fastener Adhesive Kit must be ordered when a Back Pan or Back Assembly is requested. This will allow the Loop Fastener
Adhesive on the Back Cover to attach properly.
#2 Back Cushion Assembly - 16"-18" Wide
Overall
Back
Height
Material
Back
Height
16" Wide 17" Wide 18" Wide
1160229 1160218 1160207 12-1/2" 16"
1160230 1160219 1160208 13-1/2" 17"
1160231 1160220 1160209 14-1/2" 18"
1160232 1160221 1160210 15-1/2" 19"
1160233 1160222 1160211 16-1/2" 20"
1160234 1160223 1160212 17-1/2" 21"
1160235 1160224 1160213 18-1/2" 22"
1160236 1160225 1160214 19-1/2" 23"
1160237 1160226 1160215 20-1/2" 24"
NOTE: Back cover and foam are sold as a Back Cushion Assembly only.
45
To order call toll free 1-800-333-6900, or www.invacare.com
Form No. 01-038