Intel SR9000MK4U - Manual (Page 108)

86 Intel ® Server System SR9000MK4U Product Guide
2. Tighten the two captive screws at the bottom of the power supply support. See the
figure below.
Figure 87. Tightening the Power Supply Support Screws
3. Determine your next course of action and refer to the appropriate steps:
— If you are following these steps as part of another procedure, return to that
procedure.
— If you are ready to re-assemble your server system, install the following items,
in order:
✧ The power supply box. For instructions, see
“Installing the Power Supply
Box” on page 80 .
✧ All installed power supplies. For instructions, see
“Installing a Power Supply”
on page 68 .
✧ The power supply filler panel, if necessary. For instructions, see
“Removing a
Power Supply” on page 70 . Follow step 4 only.
✧ The top cover. For instructions, see
“Installing the Top Cover” on page 37 .
AF001247