IBM 220 User Manual
Page 94
84
IBM® xSeries 220 User’s Reference
00012000
Processor machine check.
Action:
1. Update the system BIOS.
2. If the problem persists, replace the microprocessor.
00019501
Processor 1 is not functioning.
Action:
Replace microprocessor 1.
If the problem persists, call for service.
00019502
Processor 2 is not functioning.
Action:
Replace microprocessor 2.
If the problem persists, call for service.
00019701
Processor 1 failed the built-in self-test.
Action:
Replace microprocessor 1.
If the problem persists, call for service.
00019702
Processor 2 failed the built-in self-test.
Action:
Replace microprocessor 2.
If the problem persists, call for service.
00180100
A PCI adapter has requested memory resources that are not available.
Action:
1. Make sure that the PCI adapter and all other adapters are set correctly in the
Configuration/Setup Utility program. If the memory resource settings are not
correct, change the settings.
2. If all memory resources are being used, you might need to remove an adapter
to make memory available to the PCI adapter. Disabling the adapter BIOS on
the adapter might correct the error. Refer to the documentation provided with
the adapter.
00180200
A PCI adapter has requested an I/O address that is not available, or the PCI adapter might be
defective.
Action:
1. Make sure that the I/O address for the PCI adapter and all other adapters are
set correctly in the Configuration/Setup Utility program.
2. If the I/O port resource settings are correct, the PCI adapter might be defective.
Call for service.
00180300
A PCI adapter has requested a memory address that is not available, or the PCI adapter might be
defective.
Action:
1. Make sure that the memory address for all other adapters are set correctly in
the Configuration/Setup Utility program. If the memory resource settings are
not correct, change the settings.
2. If the memory resource settings are correct, the PCI adapter might be defective.
Call for service.
00180400
A PCI adapter has requested a memory address that is not available.
Action:
If all memory addresses are being used, you might need to remove an adapter to
make memory address space available to the PCI adapter. Disabling the adapter
BIOS on the adapter might correct the error. Refer to the documentation provided
with the adapter.
POST message
Description
Table 13. POST error messages