IBM 220 - Manual (Page 76)

66 IBM® xSeries 220 User’s Reference
The following table shows the pin-number assignments for the auxiliary-device
connector on the rear of the server.
Video port
Your server comes with an integrated super video graphics array (SVGA) video
controller. This controller is not removable, but you can disable it by installing a PCI
video adapter.
Note: If you install a PCI video adapter, the server BIOS code will automatically
disable the integrated video controller.
The following table shows the pin-number assignments for the 15-pin analog video
connector on the rear of the server.
Pin Signal
1 Data
2 Reserved
3 Ground
4 +5 V dc
5 Clock
6 Reserved
Table 8. Auxiliary-device connector pin-number assignments
Pin Signal Pin Signal Pin Signal
1 Analog red 6 Red
return 11 Not connected
2 Analog green or
monochrome 7 Green
return 12 DDC SDA
3 Analog blue 8 Blue
return 13 Horizontal synchronization
(Hsync)
4 Not connected 9 PIN 14 Vertical synchronization (Vsync)
5 Digital return 10 Digital
return 15 DDC SCL
Table 9. Video-port connector pin-number assignments
6
4
2 1
3
5
1 5
11 15