IBM B50 User Manual
Page 73

Error Code
Function
/Description
Repair Action/Possible Failing FRU
25AA0xxx
EEPROM problem
Notes:
1. Ensure that the EEPROM Security jumper is in the
correct position if doing a privileged-access
password installation.
2. Retry the operation.
3. If retries do not solve the problem, replace the
system board (see note 3 on page 2-1).
25AA0000
Unable to unlock
EEPROM
Refer to 25AA0xxx.
25AA0001
Read-Recv error
Refer to 25AA0xxx.
25AA0002
Read-Trans error
Refer to 25AA0xxx.
25AA0003
Write-enable error
Refer to 25AA0xxx.
25AA0004
Write-recv error
Refer to 25AA0xxx.
25AA0005
Write-disable error
Refer to 25AA0xxx.
25AA0006
Write-Trans error
Refer to 25AA0xxx.
25AA0007
Unable to lock
EEPROM
Refer to 25AA0xxx.
25Cyyxxx
Memory errors
Use the location code obtained from the SMS Error
Log utility (described in “Step 1020-3” on page 2-8) to
identify which memory dimm the error is reported
against.
Memory error codes are in the form 25Cyyxxx where
yy indicates memory dimm PD-bits and xxx indicates
the last three digits of the error code.
See “Memory PD Bits” on page 3-13 for information on
how to interpret PD bits.
25Cyy002
Memory dimm failed
memory test
1. Replace memory dimm
2. Replace system board (see note 3 on page 2-1).
See “Memory PD Bits” on page 3-13 for
information on how to interpret PD bits.
Chapter 3. Error Code to FRU Index
3-9