IBM S544-5343-03 - Manual (Page 56)

Loading Paper into the 500-Sheet Paper Trays (Tray 2, Tray 3)
Note
Many applications allow you to specify the input tray you want to use. This value
will override any value set at the printer. If your application does not let you pick an
input tray, use the Paper Menu to select the tray.
To select the 500-sheet main paper tray, set SOURCE to TRAY2 or TRAY3
(TRAY2 if you have only one 500-sheet tray or for the upper tray if you have two;
TRAY3 for the lower tray if you have two. See “Selecting The Default Input Tray”
on page 53.)
Use the following procedure to load paper into the 500-sheet paper tray:
1. Select printer paper for the 500-sheet paper tray using these guidelines:
2. Remove the 500-sheet paper tray from the printer and place on a flat surface.
Paper size A4, Letter, 13-in. Legal (Folio), 14-in. Legal
Paper weight 16- to 28-pound paper (60 grams/meter 2 to 105 grams/meter 2 )
Paper Capacity Up to 54 mm (2 in.) maximum stack height
36 Network Printer 17: User’s Guide