IBM S544-5343-03 - Manual (Page 103)

Memory Configuration (Memconfig) Menu
Use the Memory Configuration Menu to define whether or not the printer saves data
stream information when it switches ports. The following table describes the settings
you can change from the Memory Configuration Menu. An asterisk (*) next to a value
in the table indicates the factory default.
Notes:
1. To select a new value, press the Continue/Enter key when the value is displayed
in the message display area. An asterisk (*) appears next to the value in the
message display area, indicating that it is now active.
2. The actual menu items you see depend on how much memory and what options
you have installed. If you do not have enough memory, this menu will not appear
at all. For information about memory requirements, see “Memory Requirements”
on page 3. To find out how much memory you have installed, print a printer
configuration page. See “Printing the Printer Configuration Page” on page 13 for
more information.
3. If you are unfamiliar with using the operator panel to work with menus, please read
“Using the Operator Panel Keys” on page 10 and “Navigating Menus” on page 12
before continuing.
MEMCONFIG
MENU ITEM
VALUE Description
PCL SAVE OFF*
ON Specifies whether or not the printer saves PCL5e information
(downloaded fonts, macros, patterns) when it switches from
PCL5e to another data stream:
OFF—the printer does not save data.
ON—the printer saves data. This option appears only when
your printer has enough memory installed. See “Memory
Requirements” on page 3 for more information about
memory requirements.
PS2 SAVE OFF*
ON Specifies whether or not the printer saves PostScript information
(downloaded fonts, macros, patterns) when it switches from
PostScript to another data stream:
OFF—the printer does not save data.
ON—the printer saves data. This option appears only when
your printer has enough memory installed. See “Memory
Requirements” on page 3 for more information about
memory requirements.
Chapter 5. Operator Panel Menus 83