IBM S544-5343-03 - Manual (Page 223)

Appendix C. Specifications and Repackaging
This chapter describes environmental and consumable information for purchasing of
supplies. It also provides procedures for repackaging the printer for service or
relocation.
Printer Specifications
Printing system Electrophotography
Exposure system Semiconductor laser beam scanning
Resolution 600 dpi
Warm-up time Within 70 seconds after power on at 68 degrees F (20° C)
Low voltage 100–127 Volts, 50/60 Hz
Power consumption
Operating 330 watts (average)
Standby 85 watts (average)
Idle 30 watts (average)
High voltage 220–240 Volts, 50/60 Hz
Power consumption
Operating 340 watts (average)
Standby 85 watts (average)
Idle 25 watts (average)
Noise level Operating: 49.5 dBA
Idle: 32 dBA
Temperature Shipping: − 20° to 40° C ( − 4° to 104° F)
Humidity Shipping and storage: 15 to 85%
Note: The shipping and storage humidity can be between 5 to 15% or 85
to 95% for a maximum of 48 hours only.
Operating and powered off: 15 to 85%
Dimensions Basic (with tray extended to legal size):
Width 442 mm (17.4 in.)
Depth 468 mm (18.4 in.)
Height 294 mm (11.6 in.).
With trays extended to legal size, duplex unit, and 500-sheet output bin:
Width 442 mm (17.4 in.)
Depth 482 mm (19 in.)
Height 664 mm (26.1 in.).
With trays extended to legal size, duplex unit, and mailbox:
Width 442 mm (17.4 in.)
Depth 482 mm (19 in.)
Height 904 mm (35.6 in.).
 Copyright IBM Corp. 1996, 1997 203