IBM S544-5343-03 - Manual (Page 144)

Installing a New Transfer Roller
1. Hold the new transfer roller so the arrow on the orange wrapper points toward the
front of the printer.
Attention: Do not remove the orange wrapper until the transfer roller has been
installed in the printer.
2. Position the transfer roller so the ends are over the notches in the frame and the
gear end of the shaft is on the right side, as shown in the illustration.
3. Push down on both ends of the transfer roller until they snap securely into place.
Attention: Do not touch the transfer roller with your hands because skin oils will
degrade the transfer roll life.
124 Network Printer 17: User’s Guide