IBM S544-5343-03 - Manual (Page 218)

31 MEMORY ALLOC ERROR
Meaning: The printer cannot allocate the memory required to print a job.
Action: If the AUTOCONTINU item in the Config Menu is set to ON, printing
resumes in thirty seconds. Otherwise, press the Continue/Enter key. Check the
current page for errors.
40 MEMORY OPTION ERROR
Meaning: A SIMM module is not properly seated in its slot or is in some other way
defective.
Action: Turn off the printer. Pull out the controller card. Reseat the SIMM module.
If the message recurs after you restart the printer, call for service.
41 NETWORK OPTION ERROR
Meaning: The printer detected a network interface card in the top slot, but the
card is not communicating.
Action: Make sure the network card is properly installed and restart the printer.
See “Installing a Network Interface Card” on page 136. If the message recurs,
call for service.
42 NETWORK OPTION ERROR
Meaning: The printer detected a network interface card in the bottom slot, but the
card is not communicating.
Action: Make sure the network card is properly installed and restart the printer.
See “Installing a Network Interface Card” on page 136. If the message recurs,
call for service.
43 PS OPTION ERROR
Meaning: The printer has detected a problem in the PostScript module.
Action: Reinstall the PostScript SIMM. See “Installing a SIMM” on page 130. If
the message recurs, call for service.
44 IPDS OPTION ERROR
Meaning: The printer has detected a problem in the IPDS module.
Action: Reinstall the IPDS SIMM. See “Installing a SIMM” on page 130. If the
message recurs, call for service.
45 OPTION ERROR
Meaning: The printer has detected a problem in either the IPDS SIMM or the
PostScript SIMM.
Action: Reinstall the IPDS and PostScript SIMMs. See “Installing a SIMM” on
page 130. If the message recurs, call for service.
46 NETWORK OPTION ERROR
Meaning: The printer has detected that two of the same network cards have been
installed.
Action: Remove one of the cards.
198 Network Printer 17: User’s Guide