Chapter 3. paper handling – IBM S544-5343-03 User Manual

Page 41

Chapter 3. Paper Handling

This chapter describes how to:

Select print media

Load print media into the following:

– 250-sheet main paper tray (Tray 1)
– 100-sheet auxiliary tray
– 500-sheet paper tray (Tray 2, Tray 3)

– Envelope feeder

Use the 10-Bin Mailbox Option.

Use the Paper Menu to specify default trays, bins, and paper sizes for your printer.

Important: Values specified in your print jobs normally override defaults set at the
printer. For example, if a print job requests the 250-sheet paper tray (Tray 1), the
printer will use the 250-sheet paper tray, even if the default tray is set to something
else.

Also note that when mismatches occur between size and source (for example, a
job specifies a specific tray and a specific paper size, but the requested tray does
not contain the requested paper size), the printer attempts to satisfy the size
request first. If no tray contains the requested size, a message may indicate the
last tray the printer checked.

