Minolta PI4700E - Manual (Page 192)

Print options 6
Pi4700e 6-37
P
rin
te
r D
riv
er
fo
r M
a
cin
to
s
h
Cha
p
ter 6
Finishing Settings
The Finishing Settings property sheet allows you to set finishing capa-
bilities, including sort, staple, punch, and folding, for those occasions
when you need to make multiple complete sets of the original document.
(1) OutputBins
Select the machine exit tray into which the prints are to be fed.
Available options are limited by the type of finishing option configured with the ma-
chine.
Setting range: Auto, Bin1 to Bin5
(2) Staple Folding finisher is mounted>
Select whether to staple each copy set of the document.
• Off Does not staple the printed pages.
• Corner Staples together each copy set at its corner.
• Short Edge mounted> Stapled along the short edge of the docu-
ment.
• Long Edge mounted> Stapled along the long edge of the docu-
ment.
• Center Stapled at
the center of the document.
(3) Punch mounted>
Select whether to punch holes in the printed pages.
• Off Does not punch holes.
• Short Edge Punches holes along the short edge of the document.
• Long Edge Punches holes along the long edge of the document.
(4) Folding
Set the folding functions for finishing.
• Off Does not fold the printed page.
• Crease Makes a crease in the printed page.
(1)
(2)
(3)
(4)