Minicom Advanced Systems SMARTRACK 116 IP - Manual (Page 60)

SMARTRACK 116 IP
59
2. Click . The version numbers appear in the Switch box.
3. Click . The switch hardware version number appears in the
Switch box.
25.4.1.2 ROC version number
To verify the RICC version number:
1. Before you can check a ROC, you must uncheck the Switch Unit box
options.
2. Check one or more or all of the ROCs.
3. Click . The firmware version number appears after the
ROC number.
4. Click . The hardware version number appears after the
ROC number.
When “Not responding” appears, there is no computer connected, or it is switched
off.
25.4.2 Obtaining new firmware
Download the latest firmware for your system from www.minicom.com.
25.4.3 Updating the firmware
Warning!
Never switch off any computer connected to the SmartRack 116 IP system during
the updating process.
To update the firmware:
1. Select the option to update SmartRack 116 IP switch or the ROCs.
2. From the File menu, choose Open. The Open box appears. See Figure 62.
3. Navigate to the folder that contains the firmware update file. You may only
see the files that match the file selection mask.