Minicom Advanced Systems SMARTRACK 116 IP - Manual (Page 49)

USER GUIDE
48
Note! When the OSD is password protected (explained below) only the
Administrator has access to the F2 settings window.
24.1.4 The General settings
With the GENERAL line highlighted, press Enter. The General settings window
appears see Figure 53.
Figure 53 General Settings window
From this window you can do the following:
24.1.4.1 Security
The OSD comes with an advanced password security system that contains 3
different security levels. Each security level has different access rights to the
system.
These levels are as follows:
24.1.4.2 Administrator (Status A)
The Administrator can:
•
Set and modify all Passwords and security profiles
•
Fully access any computer
•
Use all OSD functions
24.1.4.3 Supervisor (Status S)
The Supervisor can:
•
Fully access any computer
•
Access the following OSD functions only –F4 Scan, F5 Tune and F6
Moving the Confirmation label.