Minicom Advanced Systems SMARTRACK 116 IP - Manual (Page 29)

USER GUIDE
28
Figure 29 User Targets Configuration
2. Select a user from the User drop-down menu.
3. Check the Target servers the user can access (according to his access
permissions). To select all Target servers, press Select All.
4. Click Apply, the selection is saved.
5. Repeat the above steps for other users.
16. Security > Settings
Configure the security features, such as Account Blocking, Password Policy and
Idle Timeout, as explained below.
From the Security section click Settings, the Security Settings appear, see Figure
30.
Figure 30 Security Settings
The Security Settings fields:
Account Blocking – decide on the number of attempts to login with a wrong
username or password after which there is a time lock or a total block.