Administration > switch configuration, Administration > user targets – Minicom Advanced Systems SMARTRACK 116 IP User Manual
Page 28
SMARTRACK 116 IP
27
14. Administration > Switch Configuration
Give the servers connected to the SmartRack 116 IP unique names, so that users
accessing the system can identify the servers easily.
To do so:
1. From the menu click Switch Configuration. The Switch Configuration window
appears, see Figure 28.
Figure 28 Switch Configuration
2. In the Server Name section change the name of the connected servers by
selecting the server name and typing a new name. Click
to save
changes.
Install switch definition file
In the event that Minicom’s Technical Support updates the Switch Definition file,
the file will be available in the Support section of our website -
.
1. Load the file onto the Client computer.
2. Locate and install the Switch Definition file. The switch definition file is
replaced.
15. Administration > User Targets
By default access is allowed to all servers for all user types. You may define the
access rights of each user separately.
To do so:
1. From the menu click User Targets. The User Targets Configuration window
appears, see Figure 29.