Minicom Advanced Systems SMARTRACK 116 IP - Manual (Page 11)

USER GUIDE
10
Figure 5 Tightening the 7 screws
6. Repeat the steps above to connect the other rail to the other side of the rack.
7. Slide the SmartRack console between the rails as shown below.
Figure 6 Sliding the SmartRack between the rails
8. Unlock and pull both left and right rail–lock switches together – see below –
and push the console all the way into the rack.
Figure 7 Rail–lock switch
9. Connect three flat screws to the rear of the console on both sides. See figure
below.