Minicom Advanced Systems SMARTRACK 116 IP User Manual
Page 48
SMARTRACK 116 IP
47
Port num ber
appears here
Instruction
keys
C=computer
Figure 51 OSD Main window
24.1.1 Navigating the OSD
To navigate up and down use the Up and Down arrow keys.
To jump from one column to the next (when relevant) use the Tab key.
To exit the OSD or return to a previous window within the OSD press Esc.
24.1.2 Selecting a computer
To select a computer:
1. Navigate to the desired computer line.
Or, type the port number of the desired computer.
2. Press Enter. The selected computer is accessed. A confirmation label appears
showing which computer is accessed.
Note! When the OSD is displayed you cannot select computers using the front
panel Select buttons or the keyboard hotkeys.
24.1.3 The OSD settings (F2)
Press F2. The OSD Settings window appears see Figure 52.
Figure 52 Settings window