Minicom Advanced Systems SMARTRACK 116 IP - Manual (Page 32)

SMARTRACK 116 IP
31
Figure 33 Restore factory settings
2. Check the box if you want to preserve Network settings.
3. Click .
20. Saving changes and logging out
To save any configuration changes and restart the SmartRack 116 IP click
. You must press after making changes to the following
pages:
•
Network>Configuration
•
Network>SNMP Settings
•
Security>Settings
•
Security>SSL Certificate
To exit the Configuration menu and close the session, click .
Only one Administrator can log into the Configuration area at a time. An idle
timeout of 30 minutes terminates the session.
21. Starting a remote session
At a Client computer open Internet Explorer (6.0 and above) and type the
SmartRack 116 IP’s IP address. https://IP address. (Note! Only SSL connections
are allowed, therefore type HTTPS before the IP address or the name of the
SmartRack 116 IP). The Login page appears. Type your username and password
and press Enter. By default, the user name is: admin and the password is access,
(both lower case).
Windows Vista Note! To login to the Web configuration interface with Windows
Vista, run Internet Explorer as Administrator. To do this, right-click the Internet
Explorer icon on the Taskbar and select Run as administrator. See figure below.