GE DEH-210 - Manual (Page 183)

PMCS Interface Toolkit Features of Tabular Data Screen Wizards
•
177
Control Tab
369 Relay - Control Tab
This tab provides limited control functionality over Modbus.
Status – indicates the current status of the output relays and general digital inputs.
Preset Values – shows the current value of the indicated field and allows you to
preset a new value. To preset a new value, click the white box containing the value
you want to change. Type a new value into the dialog box that appears and click OK.
The new value is now displayed in the Control tab and the Set button is enabled, but
the new value has not yet been sent to the device. Click the Set button: a
confirmation dialog appears. Choose Yes to set the new value to the device, No to
cancel the operation and display the value currently held in the device.
Control – These buttons are disabled unless the Serial Communications Control
setpoint in the relay is programmed to "On". · Motor status is identical to the
indicator on the Metering tab.
Clear Data – These buttons clear the designated values within the device.