GE DEH-210 - Manual (Page 116)

110
•
Features of GE Large Faceplate Wizards PMCS Interface Toolkit
Feature Function
ESCAPE Button Pressing the ESCAPE button while in line mode jumps the display up one level, from line to subgroup.
MESSAGE
UP/DOWN
Buttons Pressing the MESSAGE UP or MESSAGE DOWN button scrolls the display through individual lines of
the current subgroup within the current page, showing the available values listed below.
Panel Display
Lights The SR750/SR760 Faceplate wizard displays LEDs which are animated to match the LEDs at the actual
device.
Table 20. SR750/SR760 Faceplate animation functions.
The Wizard displays the following Pages, Subgroups and Lines shown in Chapter 5,
Actual Values, of the SR750/SR760 Instruction Manual.
Page 1: STATUS Feeder Status A single text value is displayed, indicating whether or not
an alarm condition exists. This text is not continuously
updated.
Page 2: METERING Current
Voltage
Power
Power Factor is not continuously updated.
Frequency
Energy Use
Page 5: PRODUCT INFORMATION Revision Codes Values are not continuously updated.
Calibration
Information Dates are not continuously updated.
The subgroups listed below are displayed by the device but are not implemented in
the 3-D wizard.
Page 1:STATUS Clock
Last Trip Data
Fault Locations
Hardware Inputs
Page 2: METERING Current All values supported except Current Phase Angles.
Voltage All values supported except Voltage Phase Angles and
Synchronizing Voltages.
Demand
Energy
All values supported except Watthour Costs and Last
Reset Date.
Analog Input
Page 3: MAINTENANCE Trip Counters
Arcing Current
Page 4: EVENT RECORDER Event 01, Event 02,…
Last Reset Date