GarrettCom 6K32TRC User Manual
Page 8
Magnum 6K32T & 6K32TRC Managed Switch Installation and User Guide 05/07)
3
www GarrettCom com
.
.
Maximum Standard Gigabit Ethernet Segment Lengths:
1000BASE-T (CAT5E or higher is recommended) - 100 m
1000BASE-SX, full-duplex, multi-mode(62.5
µm cable) - 220m
1000BASE-SX, full-duplex, multi-mode(50
µm cable) - 550m
1000BASE-LX, full-duplex, single-mode(62.5
µm cable) -5Km
Fiber connector types supported:
ST-type
(twist-lock)
SC-type
(snap-in)
MTRJ-type Small Form Factor (SFF)
LC-type Small Form Factor (SFF)
GBIC
modules
LEDs: Per Port
LK:
Steady ON when media link is operational
ACT: ON with receiver port activity
FDX/HDX: ON = Full-Duplex Mode
OFF = Half-Duplex Mode
100/10: ON = 100Mbps speed
OFF = 10 Mbps
Operating
Environment
UL 60950 “Component Parts” temp. ratings: 130
° F (55°C) (6K32T)
UL 60950 “Component Parts” temp. ratings: 140
° F (60°C) (6K32TRC)
IEC 60068 “Type Test” ratings:- -40
°to 185°F (-40°to 85°C)
Ambient Relative Humidity: 5% to 95% (non-condensing)
Altitude: -200 to 13,000 ft. (-60 to 4000m)
Conformal Coating (Humidity Protection) option: Request quote
Packaging
Enclosure: Rugged High strength metal. Suitable for stand-alone
or rack-mounting
Dimensions: 1.70in. H x 17.0in. W x 9.0in. D
4.32cm H x 43.2cm W x 22.9cm D
Cooling method: Fan cooled, @ 3@ 7 cfm ea.
Management Console connector
DB-9 for RS-232 “ null-modem “ cable (sometimes called an X-modem cable)
Power Supply (Internal)
AC Power Connector: IEC-type, male recessed at rear of chassis,
with adjacent manual ON-OFF switch (optional if no Alarms Cont.)
Input Voltage: 100 to 240 VAC (auto-ranging)
Input Frequency: 47 to 63 Hz (auto-ranging)
Power Consumption: 45 watts max (with fiber module)
30 watts for a fully-loaded copper only model
Fuse required for replacement- 1 Amps
DC Power Supply (Options)
-48VDC Power Input Voltage : -36 to -70 VDC