Gefen 1080P - Manual (Page 52)

Using the built-in Web Server
The Web interface is divided into three main pages: View Matrix Status, Masking, and
IP Configuration. Each of these pages is represented by a button, near the top portion of
the screen. Click on the desired button to open the its page. When the Web interface is
opened, the View Matrix Status page will be displayed.
Access the built-in Web interface by entering the IP address of the matrix that was specified
in step 3 on page 46 .
View Matrix Status
page | 42
Advanced Operation
Web Interface
Matrix Status
Displays the current routing status of the matrix. The numbers in the Output
column are always fixed. The numbers under the Input column will change
depending upon the routing status. The Status column indicates the signal state.
“Loss” indicates no signal. “Active” indicates that a signal is detected.
Refresh
Click either of these buttons to
refresh the Web page.