Gefen 1080P - Manual (Page 42)

page | 32
Advanced Operation
RS-232 / IP Commands
Command Description
#activebolo Enables the boot loader
#checkref Displays the Ref In signal
#fadefault Resets the routing and masking to factory-default settings
#prreftable Displays the reference signal table
#prwebadd Displays the current IP configuration
#rmtiradd Set the IR channel of the matrix
#rstip Resets the IP configuration to factory-default settings
#sgateway Sets the IP address of the (router) gateway
#sipadd Sets the IP Address
#snetmask Sets the Net Mask
#sport Sets the Web server listening port
m Displays the current matrix status in tabular form
r Routes the specified input to the specified output
s Routes the specified input to all outputs
#activebolo
The #activebolo command activates the boot loader used to upgrade the firmware.
See the Firmware Upgrade Procedure for more information.
Syntax:
#activebolo
Parameters:
None