Saving the current routing state, Page | 16 saving the current routing state – Gefen 1080P User Manual
Page 26
page | 16
Saving the Current Routing State
The 16x16 3G-SDI Matrix w/ Push Button Controls allows routing (and masking) states to
be saved to internal non-volatile memory. Each routing state can be recalled at a later time
(see
Recalling a Saved Routing State
). Even if the matrix is powered OFF, the presets will
be retained in memory.
We’ll illustrate an example by saving the routing state, created on
.
1. To make sure we are saving the correct routing state, press Input 6 on the front panel.
The following routing state should be displayed:
This is the routing state we created on
2. Press the
Cancel button to hide the displayed routing state. The Cancel button will
flash momentarily when pressed.
3. Press the
PreSet button, twice.
The LCD will indicate that the matrix is in save preset mode:
Routing Basics
Operating the 16x16 3G-SDI Matrix w/ Push Button Controls
PRESET MODE
SAVE CURRENT SET
GEFEN
3GSDI 16x16
PRESET MODE
SAVE CURRENT SET