Filling empty drive bays – Gateway E-9525R User Manual
Page 45
Installing and removing drives
www.gateway.com
39
6
Remove the diskette drive from the drive tray, then insert the new diskette
drive into the drive tray until it snaps into place.
7
Push the drive tray with the new diskette drive into the opening in the
media cage until it clicks into place.
8
Connect the USB cable to the back of the diskette drive.
9
Follow the instructions in
“Closing the server case” on page 32
.
10
Reinstall the bezel, if required, by snapping it into place on the front of
the chassis.
11
Reconnect all power cords and peripheral device cables, then turn on the
server.
Filling empty drive bays
Empty drive bays in the server must be filled by empty drive trays. With the bezel
removed, install the appropriate carrier, then replace the bezel by snapping it
into place on the front of the server. Empty drive carriers for unused drive bays
are included with your server.