beautypg.com

Environmental specifications, Pci device/slot, Sata – Gateway E-9525R User Manual

Page 101: Acpi, Variable requirements

background image

Environmental specifications

www.gateway.com

95

Environmental specifications

The following specifications identify maximum environmental conditions. At no
time should the server run under conditions which violate these specifications.

PCI device/slot

Riser 1 supports - one full-length, full-height 64-bit PCI-X 100 MHz
card and two PCI-Express cards

Riser 2 supports - two PCI-Express cards.

VGA

On-board Pilot SMC

2.25 MB display memory

Up to 1280 × 1024, 8 bpp or 1024 × 768, 16 bpp

LAN

Intel ESB2 controller

Dual onboard 10/100/1000 network interface

IEEE 850.3u auto-negotiation support

Full duplex support

SATA

2 SFF 8087 connectors to support as many as 6 SATA devices

ACPI

ACPI 2.0b compliance
Supports:

S0

S1

S5

Variable

Requirements

Temperature

Nonoperating: -40° to 158°F (-40° to 70°C)
Operating: 50° to 95°F (10° to 35°C) with a maximum rate of
change not to exceed 10° per hour

Humidity

Nonoperating: + 10% to +95%
Operating: +20% to +80%

Acoustic noise

Sound Pressure: 58 dBA (Rackmount) in an idle state at typical
office ambient temperature. (73.4 +/- ° F) Sound Power: 6.8 BA in
an idle state at typical office ambient temperature. (73.4 +/- 3.6° F)

Shock

Operating - 5.0 g, 11 mSec, 1/2 sine
Unpackaged - 25 g, velocity change 136 inches/sec
(

≧ 40 lbs to > 80 lbs).

Packaged - Non-palletized free fall in height 24 inches (

≧ 40 lbs

to > 80 lbs)

Vibration

Unpackaged - 5 Hz to 500 Hz, 2.20 g RMS random

Electrostatic
discharge (ESD)

+/-15 kV, air discharge
+/- 8 kV, direct contact

System cooling
requirement in
BTU/Hr

2380 BTU/hour (Based on one 700W power supply