Gateway E-9525R - Manual (Page 38)

CHAPTER 4: Installing Components www.gateway.com
32
Closing the server case
To close the server case:
1 Make sure that all of the internal cables are arranged inside the case so
they will not be pinched when you close the case.
2 Place the top cover (1) on the server, then slide it forward until it clicks into
place.
Important
The hard drive carriers shown in these
illustrations may look different than the
actual hard drive carriers in your server.
3 Replace the screw (2) to hold the top cover in place.
4 Reconnect the power cord(s) and all other cables.