Gateway 7250R - Manual (Page 28)

Closing the case 21
To replace the top panel:
1 Place the top panel on the top of the chassis approximately 3/4-inch back
from the front of the server.
2 Slide the panel toward the front of the chassis 3/4-inch, securing it in
place. The tabs on the front of the top panel slide under the lip of the
front panel.
3 Replace the screws you removed earlier.
Closing the bezel
Close the bezel to prevent accidental or unauthorized access to the server
controls, hot-plug drives, and removable media drives. To close the bezel,
swing the bezel up and press it firmly into place.
8506162.book Page 21 Wednesday, May 10, 2000 10:21 AM