beautypg.com

Gateway 7250R User Manual

Page 106

background image

Error messages

99

Insert bootable media device See “The system does not recognize a SCSI drive” on

page 89 for a possible solution.

Backup your files as soon as possible.

Insufficient disk space

Check the free space on the disk volume. If the volume is
full or almost full, remove unnecessary files.

Invalid configuration
information

Open the BIOS Setup utility, then make sure the settings
are correct.

Invalid password

Enter your password again, make sure to enter it correctly.
Be aware that some passwords are case sensitive.

If you do not know the password, you may need to reinstall
the software you are trying to access.

Startup passwords are stored in BIOS. If this password has
been set and is unknown, you may be able to reset the
password via system board jumper settings.

Keyboard clock line failure

Try a working keyboard.

Make sure that the keyboard is compatible with the system.
You may have to change the switch setting to AT.

Keyboard controller failure

Try a working keyboard.

Make sure that the keyboard is compatible with the system.
You may have to change the switch setting to AT.

Keyboard not detected

See “The keyboard does not work” on page 94 for a
possible solution.

Turn off the system, then check the keyboard cable.

Keyboard stuck key failure

Remove any objects that may be resting on the keyboard,
then restart the system.

Check for sticking keys. Clean the keyboard if necessary.

Memory errors were
detected while the system
powered up

See “The system detected memory errors during start up”
on page 89
for a possible solution.

Memory size error

Enter the BIOS Setup utility and save the memory
configuration.

Non-system disk or disk error Eject the diskette, then press

E

NTER

.

If the diskette is bootable, check it for errors.

Not enough memory

Close all programs that are not currently in use.

Print queue is full

Wait until the current print job has completed before sending
another print job.

If you receive this error often, you need to add memory to
the printer.

Error message

Solutions

8506162.book Page 99 Wednesday, May 10, 2000 10:21 AM