Gateway 7450R - Manual (Page 46)

38 Gateway 7450R Server System Manual
6 Insert the new processor by aligning pin one on the processor and the
socket, then place the processor into the socket.
7 Secure the new processor by pushing the lever arm all of the way down
until it clicks into place.
8 Replace the heatsink. Make sure that the heatsink is oriented properly
over the processor and socket.
9 Close the case. See “Closing the case” on page 20.
10 Reconnect the power cord and all other cords you removed, then turn
on the system.
1
2
Pin 1
8507328.book Page 38 Thursday, February 15, 2001 11:28 AM