GTO GP-SW050 - Manual (Page 37)

installation checklist
The installation of this operator conforms to CLASS __________.
The installer verifies that (each item must be checked):
____ Required safety edges or photo beams were installed.
____ Customer was informed that this gate is for vehicular use ONLY. Pedestrians MAY NOT use this gate.
____ A separate gate or entrance was installed for pedestrian use.
____ All warning signs and labels were installed as specified in the IMPORTANT SAFETY INSTRUCTIONS.
____ Safety instructions were reviewed with the customer.
____ The IMPORTANT SAFETY INSTRUCTIONS manual was given to the customer.
____ Customer was asked to fill out customer support card and mail it to GTO, Inc.
____ Customer was asked to retain all receipts (receipts provide proof of warranty).
____ Customer was asked to retain IMPORTANT SAFETY INSTRUCTIONS, etc. for future reference.
____ The completed installation was photographed from both the front and back of the gate. Photo was dated.
© 2008 GTO, Inc.
w w w . g t o a c c e s s . c o m
Customer’s Signature Date
Installer’s Signature Date