GTO GP-SW050 - Manual (Page 32)

29
Maintenance
Maintenance schedule:
• Test the operator, accessories, and safety devices monthly.
• Service the gate operator, accessories, and safety devices regularly.
Maintenance checklist
• Test the safety edges to make sure the gate responds.
• Check the obstruction settings (both open and close modes) see page 18.
• Check for wear on all moving parts, and tighten bolts as necessary.
• Check the gearbox for any sign of oil leakage. If the gearbox is leaking,
call the GTO Service Department for assistance.
• Check hinges on the gate and lubricate if needed.
• Check for loose or corroded wires.
• Make sure the warning signs (see page 5) are installed.
WarNiNg: alWaYs tUrN oPerator oFF aND DiscoNNect
ac PoWer BeFore aDJUstiNg or serViciNg it.