Gateway E-5400 - Manual (Page 27)

20 Case Access
Closing the case
Replace the chassis cover as soon as you finish installing or removing
components so that dust and dirt (which can damage the computer) do not
collect inside the computer.
To replace the bezel:
1 Holding the bezel at an angle to the front of the chassis, place the hinge
tabs on the right side of the bezel in the appropriate slots in the front
of the chassis.
2 Swing the left side of the bezel toward the chassis until the retaining tabs
snap into place.
Four hinge tabs are located
on the right side of the bezel
and are not visible in this
illustration
05030.book Page 20 Monday, November 22, 1999 8:23 AM