Gateway E-5400 - Manual (Page 106)

Video problems 99
The video is distorted
Probable Cause Solution
The monitor’s controls
are not properly
adjusted. Adjust the monitor controls until the text
becomes clear. (See your monitor
documentation for more information.)
The connector or cable
is damaged. Check the connector and cable for bent or
damaged pins.
The surge protector or
UPS is damaged. Disconnect the monitor power cable, then
connect it directly to the power source.
The monitor is too close
to a source of electrical
interference. Move the monitor away from sources of
electrical interference, such as televisions,
unshielded speakers, microwave ovens,
fluorescent lights, and metal beams or
shelves.
The monitor needs to be
degaussed. Turn off the computer and monitor and leave
them off for at least a half hour, then restart
the system.
05030.book Page 99 Monday, November 22, 1999 8:23 AM