FARGO electronic C30 - Manual (Page 93)

RESTRICTED USE ONLY Fargo Electronics, Inc.
Persona C30 Card Printer User Guide (Rev. 2.2) 4-40
Resolving the Card Surface Debris problems
All Troubleshooting procedures assume that only factory-authorized supplies are in use in
the Printer.
Step Procedure
1 Review the following information.

Symptom: Prints have spots (white or colored voids) and/or dust on them
(See sample image below).

Printer Error State: None

Driver Monitor Error Display: None
2 Ensure the cards are clean and stored in a dust-free environment. Do not use
cards with embedded contaminants in the surface.
3 Clean the inside of the Printer. See Cleaning the Printer's Interior .
4 Clean the Cleaning Roller. See Cleaning the Card Feed and Cleaning Rollers .