Resolving a ribbon out error -21, Resolving a ribbon out error – FARGO electronic C30 User Manual
Page 74
RESTRICTED USE ONLY
Fargo Electronics, Inc.
Persona C30 Card Printer User Guide (Rev. 2.2)
4-21
Resolving a Ribbon Out Error
All Troubleshooting procedures assume that only factory-authorized supplies are in use in
the Printer.
NOTE: Using the printer in direct sunlight may adversely affect the ribbon sensor integrity.
Step
Procedure
1
Review the following information.
Symptom: Printer will not print.
Printer Error State: The Ribbon Sensor has detected the End Of Ribbon
mark
Driver Monitor Error Display: Ribbon Out
2
Replace the Ribbon Cartridge
a. Press on the Resume button.