beautypg.com

Using the print left of form option -96, Using the print left of form option – FARGO electronic C30 User Manual

Page 203

background image

RESTRICTED USE ONLY

Fargo Electronics, Inc.

Persona C30 Card Printer User Guide (Rev. 2.2)

5-96

Using the Print Left of Form Option

Use this option to adjust the vertical position of the printed image on a card so it appears
centered. (Note: When adjusting this value, keep in mind that cards always remain in the
same landscape orientation while moving through the Printer.)

Step

Procedure

1

Enter a negative value to move the image towards the bottom edge of the
card (See image below),

OR

Enter a positive value to move the image towards the back top edge of the
card (see image below).

Maximum Adjustment Range: The maximum adjustment range is

±

127.

As a rule, 10 equals about .030"/. 8mm. This is about the same as the
thickness of a standard CR-80 size card.