Connecting the printer power -4, Connecting the printer power – FARGO electronic C30 User Manual
Page 30
RESTRICTED USE ONLY
Fargo Electronics, Inc.
Persona C30 Card Printer User Guide (Rev. 2.2)
3-4
Connecting the Printer power
Follow this procedure. (Note: Do not connect the Printer
’
s USB cable until prompted during
the Printer Driver installation.)
Step
Procedure
1
Plug the AC adapter power cable into the back of the Printer. See Display A.
2
Plug the wall power cable into the AC power adapter.
3
Plug the wall power cable into a standard 110VAC power outlet.
Display A
–
Shows back of Printer with AC power cable (below).