FARGO electronic C30 - Manual (Page 104)

RESTRICTED USE ONLY Fargo Electronics, Inc.
Persona C30 Card Printer User Guide (Rev. 2.2) 4-51
Resolving the Poor Image Quality problems
All Troubleshooting procedures assume that only factory-authorized supplies are in use in
the Printer.
Step Procedure
1 Review the following information.

Symptom: Photos on the cards look pixilated or grainy, as shown below.

Printer Error State: None

Driver Monitor Error Display: None
2 Use high-resolution, 24-bit color images to always capture an image:

at a 24-bit color setting

at 300 dpi

at the same size that it will be printed on the card, as captured either with a
scanner or with a digital camera
If a small or low-resolution image is stretched or blown up, a pixilated or grainy
effect will occur when printing, as shown below (rightside).