FARGO electronic C30 - Manual (Page 83)

RESTRICTED USE ONLY Fargo Electronics, Inc.
Persona C30 Card Printer User Guide (Rev. 2.2) 4-30
Resolving a Headlift Motor or Sensor Error
All Troubleshooting procedures assume that only factory-authorized supplies are in use in
the Printer.
Step Procedure
1 Review the following information.

Symptom: The Printhead continuously cycles or does not cycle at all

Printer Error State: Headlift Sensor is not detecting movement from the
Headlift Cam

Driver Monitor Error Display: General Error