FARGO electronic C30 - Manual (Page 56)

RESTRICTED USE ONLY Fargo Electronics, Inc.
Persona C30 Card Printer User Guide (Rev. 2.2) 4-3
Resolving the Communication Errors (continued)
Step Procedure
4 Determine the problem with printing from the application.
a. Print a self-test from the Printer by holding down the Pause button on
power up to ensure that the Printer (itself) is functioning properly.
b. Print the Windows test page that is located in the General tab of the Driver.
c. Use WordPad (a Windows 98SE, Me/2000/XP word processing program in
the Accessories Program Group).
1) Go to the File menu and select Page Setup.
2) Click on the Printer button and select the Persona C30 Card
Printer.
3) Click OK and reset all four margins to zero. (Note: The WordPad
will automatically replace the values with its minimum margins.)
4) Open the program and type:
“
This is a Test.
”
then, go to File on the
menu bar and select Print.
5 Determine whether there is adequate hard Drive space.
(Note: A large volume of temporary files on the computer can cause
communications errors.)
a. Access the temporary files by following this process:

Search for all folders called TEMP. Once found, clear out the contents
of the folders.

If using Windows 98SE, Me/2000/XP, run the System Utility - Disk
Defragmenter found in the Accessories folder of the Start Menu.

Use a disk cleanup utility (such as Disk Cleanup found in the System
Tools folder of the Start menu) or use a third party application.