beautypg.com

FARGO electronic C30 User Manual

Page 80

background image

RESTRICTED USE ONLY

Fargo Electronics, Inc.

Persona C30 Card Printer User Guide (Rev. 2.2)

4-27

Resolving a Wrong Ribbon Error (continued)

Step

Procedure

2

Verify the Driver settings are correct.

a. Open the Printer Control Panel from the Computer.

If using Windows 98SE, Me, right click on the C30 Card Printer Icon

and select Properties.

If using Windows 2000/XP, right click on the C30 Card Printer and

select Printing Preferences.

b. Click on the Device Option tab.

c. Click on the auto select button.

d. Check that the Ribbon type matches the Ribbon selected.

3

Press on the Resume button.

If the issue persists, continue to Step 4.

4

Remove the rear cover and check that the Ribbon RFID cable is securely
connected to the Main Board (J-5) and the RFID Sensor.

If the connections are loose, reattach it.

Press on the Resume button.

If the connections are good or if the issue persists, continue to Step 5.

5

Replace the Ribbon RFID Sensor.