FARGO electronic C30 - Manual (Page 68)

RESTRICTED USE ONLY Fargo Electronics, Inc.
Persona C30 Card Printer User Guide (Rev. 2.2) 4-15
Resolving the No Mag Installed Error
All Troubleshooting procedures assume that only factory-authorized supplies are in use in
the Printer.
Step Procedure
1 Review the following information.

Symptom: There is not a Magnetic Encoder installed.

Printer Error State: A print job with Magnetic encoding was sent with no
Magnetic encoder installed in the Printer.

Driver Monitor Error Display: No Mag Installed