Placing the printer in the upgrade mode -11, Placing the printer in the upgrade mode – FARGO electronic C30 User Manual
Page 233
RESTRICTED USE ONLY
Fargo Electronics, Inc.
Persona C30 Card Printer User Guide (Rev. 2.2)
10-11
Placing the Printer in the Upgrade Mode
Step
Procedure
1
Disconnect Power from the Printer.
2
Press and hold down the power and pause buttons on the Printer.
3
Reapply power to the Printer. Hold for 2 seconds then release. Both buttons
will blink when it is in the Upgrade Mode.