FUJITSU SPARC Enterprise Server M3000 - Manual (Page 189)

E-1
A P P E N D I X
E
DC Power Supply Model
This appendix describes the requirements specific to the DC power supply model.
Contact your sales representative for the DC power supply model.
To use the DC power supply model, make sure to read this information.
■ Section E.1, “The Server Views” on page E-2
This is equivalent to Section 2.1, “Name of Each Part” on page 2-1 . When using
the DC power supply model, refer to the content described in this appendix.
■ Section E.2, “LED Functions of Power Supply Unit” on page E-4
This is equivalent to TABLE 2-5 . When using the DC power supply model, refer to
the content described in this appendix.
■ Section E.3, “Electrical Specifications” on page E-5
This is equivalent to TABLE B-7 . When using the DC power supply model, refer to
the content described in this appendix.
■ Section E.4, “Using the showhardconf Command” on page E-6
This is equivalent to Section 3.5.1, “Using the showhardconf Command” on
page 3-11 , Section 4.4.2, “Verifying the Hardware Operation (Power supply
unit/Fan unit)” on page 4-10 and Section 4.5.4, “Verifying the Hardware
Operation” on page 4-15 . When using the DC power supply model, refer to the
content described in this appendix.
Note – The content not mentioned in this appendix is common to the AC power
supply model and the DC power supply model. Refer to the description in each
chapter.