FARGO electronic DTC500 - Manual (Page 92)

RESTRICTED USE ONLY Fargo Electronics, Inc.
DTC500 Series Card Printer/Encoders User Guide (Rev. 5.0) 92
Resolving the Card Hopper Empty Error Message
Symptom: The Hopper Empty error message is displayed on the LCD.
Step Procedure
1 Refill the hopper when convenient.
2 Be sure to load cards with the mag stripe toward the rear of the Printer.
3 Turn the Card Sensor off if it is determined that the Hopper
’
s Card Sensor
cannot see these types of cards. (Note: The activated Sensor indicates to
the Printer that the Card Input Hopper is empty, and the cards will not feed.)